Product Overview
Testing at temperature? See the OMNI 6110H Heated Viscometer: heated cup to 93 °C, 12 speeds, touchscreen and automatic PV/YP/gel calculations.
Six-Speed Rotational Viscometer for Drilling Fluid Rheology
The OMNI 6110 measures the rheology of drilling fluids and other laboratory liquids at six standard speeds. Electronic speed control replaces mechanical gear shifting for better long-term stability and repeatability.
Multi-point readings let you plot rheology curves and evaluate non-Newtonian fluids, including apparent viscosity, plastic viscosity, yield point, gel strength, flow behavior index, and consistency coefficient.
Key Features
- Six standard speeds: 3, 6, 100, 200, 300, and 600 rpm.
- Push-button speed selection with electronic speed control.
- Large dial display that is easy to read under varied lab lighting.
- Low-drift circuitry and stable motor performance over long runs.
- Standard torque spring for conventional dial-reading conversion.
- Includes stainless sample cup and measuring assembly.
Technical Specifications
| Speeds | 3, 6, 100, 200, 300, 600 rpm |
| Shear rate factors | 5.11, 10.22, 170.33, 340.66, 511, 1022 s⁻¹ |
| Viscosity range (F1 assembly) | Newtonian 1–300 mPa·s; non-Newtonian 1–150 mPa·s |
| Shear stress range (F1 assembly) | 0–153.3 Pa |
| Accuracy (Newtonian) | ±1 mPa·s from 1–25 mPa·s; ±4% above 25 mPa·s |
| Motor | 40 W, 800 rpm |
| Power supply | 120 V, single-phase, 60 Hz |
| Dimensions (W × D × H) | 32 × 18 × 44 cm (12.6 × 7.1 × 17.3 in) |
| Net weight | 9 kg (19.8 lb) |
| Warranty | 1 year from delivery |
Ordering & Support
Request a quote for pricing and lead time. Payment by ACH/wire or check. FOB Covina, California. Contact richard@omnirnd.com or 626-536-8052.
Warranty Information
Omni R&D warrants that products will substantially conform to its published specifications for one year from the date of delivery. Warranty claims must be made in writing within that period.
This warranty does not apply where the product has been misused, modified, improperly installed, operated outside its rated parameters or applicable industry standards, connected to a power supply other than the one specified, or damaged by accident, neglect, or contamination. Consumable components — including heating elements, process tubes, crucibles, thermocouples, seals, and gaskets — are excluded.
